Toyota & Lexus ADAS
Calibration in Diamond Bar
Toyota Safety Sense and Lexus Safety System+ calibration, mobile or in-shop
Toyota & Lexus ADAS calibration in Diamond Bar for drivers, dealerships, fleets, glass shops and body shops. We calibrate the cameras and radar behind Toyota Safety Sense and Lexus Safety System+, and we serve Pomona and the Inland Empire too.
Toyota and Lexus systems we calibrate
Toyota Safety Sense and Lexus Safety System+ rely on a windshield camera and front radar. Many models add blind spot radar, parking sensors and cameras.
Forward camera
The windshield camera used for lane and pre-collision alerts. See Windshield Camera Calibration and Camera Calibration.
Front radar
The radar behind the grille or emblem used by Dynamic Radar Cruise Control and pre-collision. See Radar Calibration.
Blind Spot Monitor
Rear corner radar in the bumper. See Blind Spot Calibration.
Parking, 360 camera and steering angle
See Parking Sensor Calibration, Surround View Camera Calibration and Steering Angle Sensor Calibration.
What Toyota and Lexus require
Toyota does not publish one current position statement on calibration. This plain English summary comes from Toyota collision repair publications and Toyota and Lexus service bulletins. Exact steps vary by model and year.
Check every sensor that was touched
Toyota says to check the calibration of any sensor that may have been damaged, misaligned, removed or replaced. Calibration steps after collision repair, wheel alignment and sensor work are in the repair manual for each vehicle, and a final health check should show no trouble codes.
Source: Toyota Collision Pros, Toyota Safety System Calibration
Front camera after glass work
On the models it covers, a Toyota service bulletin says the front camera must be calibrated when the camera is replaced, when the windshield is replaced or removed and reinstalled, or when certain camera codes set.
Source: Toyota T-SB-0184-17
Bumper repairs near sensors
Toyota says a rear bumper damaged around the Blind Spot Monitor sensor should be replaced, and that repairs or extra paint can affect radar. After repairs, sensors are calibrated and checked for codes, with health checks before and after.
Level ground for radar
A Lexus bulletin says the vehicle and target must be on a level surface for radar calibration, or a floor slope compensation procedure must be used.
Source: Lexus L-SB-0046-21
When your Toyota or Lexus needs calibration
These are the most common triggers. We confirm the procedure for your VIN before any work.
Windshield replacement
A new or reinstalled windshield moves the camera, so it gets calibrated. See calibration after windshield replacement.
Collision or bumper work
Front or rear bumper, grille, or sensor bracket repairs can shift radar and cameras.
After a wheel alignment
We do not do wheel alignments. We work with partner alignment shops and calibrate after the alignment.
A warning light or message
A system unavailable message or warning light can mean a sensor is out of calibration. See Diagnostic Scanning.
3 steps to calibration
Send the VIN
Call, text, or use the quote form. You get a free itemized quote by VIN that lists the calibrations your Toyota or Lexus needs.
We Calibrate
Fast scheduling, mobile or in-shop in Diamond Bar. We scan, set up the targets or drive cycle the procedure calls for, and calibrate.
Verify and Document
A post scan confirms no codes remain, and you get a record of what was calibrated. Calibration work carries a 90-day warranty.
Toyota & Lexus ADAS Calibration FAQ
Short answers for Toyota & Lexus owners, dealerships, fleets, glass shops and body shops.
Does my Toyota or Lexus need calibration after a windshield replacement?
On the models covered by the Toyota bulletin, yes. It calls for front camera calibration when the windshield is replaced or removed and reinstalled. We check the procedure for your VIN.
Do you do the wheel alignment?
No. We work with partner alignment shops and calibrate after the alignment is done.
How do I get a quote?
Send us the VIN. You get a free itemized quote by VIN, and calibration work carries a 90-day warranty.
Are you a Toyota or Lexus dealer?
No. Fuzetech ADAS is independent. We follow the Toyota and Lexus procedure for your VIN.
Get Your Free Quote by VIN
Fast scheduling for Toyota & Lexus ADAS calibration in Diamond Bar. Mon to Fri 8 to 7, weekends by appointment. Call (213) 609-2606.
Toyota, Lexus, Mercedes-Benz and BMW are trademarks of their owners; Fuzetech ADAS is independent.